DWG SET B // CAD LIBRARY
CAD Library
Parts and assemblies I've modeled, loaded straight from the exported files. Rotate them, explode the assemblies, cut a section, measure between two points, and download the STEP or STL if you want to open them yourself.
MURPHY'S TANK · ME 2500J // 5 MODELS
Murphy's Tank: Six-Wheel Chassis
The six-wheel chassis I modeled for our ME 2500J gap-crossing vehicle: three wheel stations 185 mm apart on shafts, carried by the frame and legs. Explode it to see how it goes together.
Murphy's Tank: Reinforced Frame
The printed chassis with its steel braces, set up as the assembly I ran a SOLIDWORKS static study on at 1000 N.
Helical Gear
A helical gear I modeled for the vehicle drivetrain and prepared for 3D printing.
Worm Gear
A worm gear I modeled while working on the drivetrain for our ME 2500J vehicle.
Printed Wheel
One of the six printed wheels from the vehicle.
SOLIDWORKS PRACTICE // 9 MODELS
Spur Gear
A spur gear modeled in SOLIDWORKS as one of my CAD practice exercises.
Kettlebell
A full-size kettlebell modeled in SOLIDWORKS as a practice exercise.
Chess Piece
A chess piece modeled in SOLIDWORKS as a practice exercise.
Gear Rack
A straight gear rack, modeled as a SOLIDWORKS practice exercise.
Flanged Pipe Elbow
A 90 degree pipe elbow with bolted flanges, modeled as a SOLIDWORKS practice exercise.
Hex Nut and Bolt with Base
A hexagonal nut and bolt on a base, modeled as a SOLIDWORKS practice exercise.
Pivot Bracket
A bracket with a pivot eye, modeled as a SOLIDWORKS practice exercise.
Flanged Mount
A flanged mount with a bolt pattern, modeled as a SOLIDWORKS practice exercise.
Perforated Disc
An 80 mm disc with a circular pattern of cutouts, modeled in SOLIDWORKS.